Hydronics Systems Terminals Units

  • Cassette Fan Coil Units
  • Fan Coil Units
  • High Static Duct Type Fan Coil Units
  • High Vol.High Stat. Duct Type F C U
  • High Wall Fan Coil Units (I-HHVI)

Cassette Fan Coil Units

Cooling/Heating
Terminal Unit
Cooling capacity: 2,5 kW – 10,5 kW

HeatCooling capacity: 5,7 kW- 17,2 kW

Interklima Hydronic Cassette Fan Coils are the ideal solution for cooling/heating applications. They are available in eight models with nominal capacities ranging from 2,5kW to 10,5 kW in cooling and 5,7kW up to 17,2kW in heating.

This series is ideal in combination with Interklima air cooled water chillers or heat pumps for air conditioning offices, shops or any other commercial application, where floor and wall space is needed for fittings and furniture, by being installed flush into every ceilling with various air flow pattern flexibility according to the room shape and layout.

Features:
  • Stylish.
  • Compact and lightweight.
  • Ideal for standardized false ceilings.
  • Low noise.
  • Variable air flow distribution patterns.
  • Infrared remote control. (standard) or wired controller availability.
  • Master-Slave control capability.
  • RS-485 Port, for BMS communication.
  • Built-in condensate pump.
  • Easy access to all the components for maintenance
  • Standard filter for clean air.
  • Fresh air and branch ducting capability.
  • Self diagnosis.

Fan Coil Units

Cooling/Heating
Terminal Unit
Cooling capacity: 1,8 kW – 9,0 kW
Heating capacity: 2,7 kW – 13,5 kW

Interklima Fan coil Units are the solution for cooling/heating applications. They are available in a wide range of models and sizes with nominal capacities ranging from 1.8 kW to 9.0 kW in cooling and 2.7 kW up to 13.5 kW in heating.

This extensive Fan Coil series is ideal in combination with Interklima water chillers or heat pumps for air-conditioning residences, offices, shops or any other commercial application were comfort conditions are required, blending in perfectly with the aesthetics of any space.

Features:
  • Wide variety of models
  • Slim line design
  • 2 or 4-pipe models
  • Aerodynamically shaped air outlet
  • Double suction centrifugal fans with aluminum impellers
  • Multi speed motors
  • Completely noiseless operation
  • Standard control consisting of 3 speed switch thermostat and summer – winter switch unit mounted and wired
  • A connection for 3 way valve is provided on the terminal block

High Static Duct Type Fan Coil Units

BCW 20 (4R-6R)

COOLING/HEATING
Terminal Unit
Cooling capacity: 6,2 kW – 19,9 kW

Heating capacity: 12,9 kW- 37,9 kW

Air Flow: 830m3/h – 2660m3/h

Interklima High Static Duct type Fan Coils are the ideal solution for cooling/heating applications. They are available in 2 models with nominal capacities ranging from 6,2 kW to 19,9 kW in cooling and 12,9 kW up to 37,9kW in heating depending on the external static pressure.

This series is ideal in combination with Interklima air cooled water chillers or heat pumps for air conditioning offices, shops or any other commercial application, where floor and wall space is needed for fittings and furniture, allowing various air flow pattern flexibility through ducts according to the room shape and layout.

Features:
  • Low height (370mm).
  • Easy access to all the components for maintenance.
  • High external static pressure availability (80 – 120pa).
  • Casing mode of galvanized steel. Electrostatically applied powder coating RAL 9002 (60 – 70 μ) available upon request.
  • EU 3 air filter.
  • Insulated drain pan.
  • Low operating noise levels.
  • Multiple speed fan motor.
  • A wide selection of optional accessories like additional water heating coil, discharge and return plenums with duct connection fittings available upon request.

High Volume-High Static Duct Type Fan Coil Units

Cooling/Heating
Terminal Unit
Cooling capacity: 7.44 kW – 48.9 kW

Heating capacity: 8.2 kW – 54.6 kW

Air flow: 1.250m3/h – 8.350m3/h

Interklima high volume/high static duct type Fan Coils are the ideal solution for cooling/heating applications. They are available in 2 versions (single fan/double fan) and a total of 8 models with nominal capacities ranging from 7.44 kW to 48.9 kw in cooling and 8.2kw – 54.6kw in heating depending on the external static pressure and air volumes from 1.250m3/hto8.350m3/h.

This series is ideal in combination with Interklima air cooled water chillers or heat pumps for air conditioning offices, shops or any other commercial application, where floor and wall space is needed for fittings and furniture, allowing various air flow pattern flexibility through ducts according to the room shape and layout.

Features:
  • Easy access to all the components for maintenance.
  • High external static pressure availability.
  • RAL9002 powder polyesteric salt spray tested coating for external surfaces available upon request.
  • The panels are of double skin type using hot dip galvanized steel with in between thermal and sound insulation of factory injected polyurathane 25mm thick.
  • Centrifugal type fans with double width double inlet and forward curved blades.
  • Direct driven motors.
  • Standard G2-G3 air filter.
  • Low height (458-662mm).
  • Insulated drain pan.
  • Low operating noise levels.
  • Multiple speed fan motor.
  • A wide selection of optional accessories like additional water heating coil, aluminum filter, eliminator, belt driven.

High Wall Fan Coil Units (I-HHVI)

Cooling/Heating
Terminal Unit
Cooling capacity: 1,4 kW – 4,6 kW

Heating capacity: 2,5 kW – 7,3 kW

Interklima High wall Fan coll units are the Ideal solution for cooling/heating applications.They are available In a wide range of models and si¬zes with nominal capacities ranging from 1.4 kW to 4.6 kW in cooling and 2.5 kW up to 7.3 kW in heating.

This extensive Fan Coil series is ideal in com-bination with Interklima water chillers or heat pumps for airconditioning residences, offices, shops or any other commercial application were comfort conditions are required, blending in perfectly with the aisthetics of any space.

Features:
    • Modern slimline design
    • Optional 3-way control valve, housed inside the unit
    • Flexible hoses and brass connectors
    • Remote Control handset

Microprocessor control with

  • master slave control
  • status indication to boiler Schiller
  • value control.
  • auto restart
loading